Home › Products › Industrial Dehumidifiers › Air Handling Unit Type Desiccant (Rotor) Dehumidifiers › Desiccant Dehumidifier TTR 13500
Desiccant Dehumidifier TTR 13500
A comprehensively equipped desiccant dehumidifier with an incredible dehumidification capacity of 74 kg per hour
- Fast delivery across Turkey
- Profesyonel montaj & devreye alma
- Spare parts and after-sales support
Product Details
Desiccant dehumidifier with comprehensive equipment, featuring an incredible moisture removal capacity of 74 kg per hour
Highest dry air capacity even at low dew points
With a nominal moisture removal capacity of approximately 1,790 kilograms per day at a constant pressure of 400 Pa and a nominal air volume of 13,500 cubic meters of dry air per hour, the TTR 13.300 is optimally equipped for very high dry air requirements in cold environments with low dew point thresholds.
For example, the best conditions for continuous dry-keeping, gas dehumidification or dry air generation, in the chemical, pharmaceutical and food industries and in machine manufacturing, as well as for protecting machines, fixtures and buildings against corrosion, condensation and mold formation, in water treatment plants or electrical connection centers.
German-made high performance
With the TTR 13500, you don't benefit from a long-lasting and service-friendly design with a very high usage life without reason; as a result, this is an original TeknoDRY desiccant dehumidifier, without exception containing branded components of the latest technological generation from leading component manufacturers, developed and manufactured according to the highest quality standards in Germany.
Perfect airflow
The high-performance fans of the TTR 13500 are driven by energy-saving EC motors, whose speeds are independently adjusted via the Duoventic controller. Thanks to this integrated Duoventic air volume control, the TTR 13500 desiccant dehumidification unit can be quickly and needs-oriented configured for every requirement without any conversion work. Extremely dry air at low airflow, large volumes of dry air, or maximum circulation air capacity with a measured dry air ratio.
| Technical Information | ||
|---|---|---|
| General | ||
| Product number | 1.110.000.195 | |
| Dry air (at intake air of 20°C / 60% relative humidity) | ||
| Moisture removal [kg/24h] | 1.596 | |
| Moisture removal [kg/h] | 66,5 | |
| Free-blow air volume [m³/h] | 12.500 | |
| Nominal air volume | Dry air (at intake air of 20°C / 60% relative humidity) [m³/h] | 11.800 | |
| External compression | Dry air (at intake air of 20°C / 60% relative humidity) [Pa] | 300 | |
| Inlet connection Ø [mm] | Dry air (at intake air of 20°C / 60% relative humidity) | 700 | |
| Outlet connection Ø | Dry air (at intake air of 20°C / 60% relative humidity) [mm] | 700 | |
| Regeneration air | ||
| Nominal air volume | Regeneration air [m³/h] | 2.380 | |
| External compression | Regeneration air [Pa] | 300 | |
| Inlet connection Ø | Regeneration air [mm] | 400 | |
| Outlet connection Ø | Regeneration air [mm] | 400 | |
| Operating principle | ||
| Operating principle | TTR-Trisorp-Dual | |
| Operating range | ||
| min. temperature [°C] | -20 | |
| max. temperature [°C] | 40 | |
| min. humidity [% relative humidity] | 0 | |
| max. humidity [% relative humidity (non-condensing)] | 100 | |
| Electrical values | ||
| Mains connection | 380 – 480 V, 50/60 Hz | |
| Nominal current consumption [A] | 129 | |
| Installed power [kW] | 89 | |
| Heating capacity [kW] | 81 | |
| Recommended fuse [A] | 160 | |
| Electrical connection | ||
| Terminal connection | ||
| high air capacity | ||
| Continuous moisture removal | ||
| Dimensions | ||
| Length (excluding packaging) [mm] | 2.032 | |
| Width (excluding packaging) [mm] | 1.460 | |
| Height (excluding packaging) [mm] | 1.802 | |
| Weight | ||
| (excluding packaging) [kg] | 1.000 | |
| Equipment, features and functions | ||
|---|---|---|
| Outer casing type | ||
| Steel outer casing, galvanized and painted | ||
| Stainless steel | ||
| Device model | ||
| Indoor installation (standard) | ||
| Weather-protected | ||
| Rental model | ||
| stackable | ||
| Equipment | ||
| Wide scope | ||
| Rotor rotation control (rotor and drive) | ||
| Re-opening locked overtemperature safety system (regeneration air) | ||
| Operating temperature management (regeneration air) | ||
| Filter monitoring (each air stream and general warning lamp) | ||
| Duoventic control | ||
| Configurable air direction reversal function (low-cost retrofit) | ||
| Terminals for external ON/OFF | ||
| Hygrostat connection terminals | ||
| Potential-free contacts (operation, fault, filter) | ||
| Operating hours counter | ||
| Air volume control | ||
| Integrated heat recovery unit | ||
| Sensor-supported FlowMatic control | ||
| Hygrostat (electronic) | ||
| Hygrostat (mechanical) | ||
| Humidity control | ||
| Humidity and temperature detection | ||
| Power consumption meter | ||
| Ammeter | ||
| DIN socket for external ON/OFF | ||
| Regeneration heater type | ||
| Electric resistance | ||
| Electro-PTC | ||
| Saturated steam (4 barg) | ||
| Gas | ||
| Air pre/post treatment | ||
| Pre-cooling | ||
| Re-cooling | ||
| Pre-heating | ||
| Re-heating | ||
| Portability | ||
| Transport frame | ||
| Braked castor wheels | ||
| Trestle wheels | ||
| Crane – lifting equipment | ||
| Stacker pockets | ||
Optional Features
This device can be controlled via the SCADA system. It is not included in the standard equipment and is offered as an optional feature.
- Device fault detection via MODBUS RS-485 infrastructure
- Remote control; ability to read temperature and humidity values
- Ability to record measured values
The device can perform its own drainage from the drain point on it. For upward or long-distance water drainage connections, a water pump can optionally be integrated.
Get a Quote for This Product
Would you like to talk right away?
WhatsApp'tan Yaz ☎ +90 507 617 49 59- ✔ Free site survey and sizing
- ✔ Same-day response
- ✔ Installation and commissioning included
How It Works?
Humid air, slowly rotating silica gel coated desikant rotordan passes through; moisture is absorbed by the rotor. A small segment of the rotor is continuously dried with heated regeneration air, and the moisture is expelled through a separate duct. This way eksi sıcaklıklarda bile and operates continuously even at very low humidity targets.
