Home › Products › Industrial Dehumidifiers › Air Handling Unit Type Desiccant (Rotor) Dehumidifiers › Desiccant Dehumidifier TTR 1400
Desiccant Dehumidifier TTR 1400
This dehumidifier operates on the desiccant principle. This ensures not only reliable and high performance at low temperatures, but also allows reaching a lower dew point compared to condensation dehumidifiers.
- Fast delivery across Turkey
- Profesyonel montaj & devreye alma
- Spare parts and after-sales support
Product Details
Desiccant Dehumidifier TTR 1400
This dehumidifier operates on the desiccant principle. This not only ensures reliable and high performance at low temperatures, but also allows reaching a lower dew point compared to condensation dehumidifiers.
Desiccant Dehumidifier TTR 1400Thanks to the internal heat recovery and electronic adjustment of the dry air flow rate, TTR 1400, like other TTR desiccant dehumidifiers, takes its place among the most cost-effective desiccant dehumidifiers!
Its robust technology developed according to industrial standards makes TTR 1400 a reliable partner in dehumidification even under difficult conditions.
- "Made in Germany" quality robust units
- High dehumidification capacity even at low temperatures
- Washable and mechanically robust designed reliable silica gel desiccant rotors
- Internal heat recovery
- Electric regeneration heating
- Adjustment for function and consumption control
| Technical Information | ||
|---|---|---|
| General | ||
| Product number | 1.110.000.160 | |
| Dry air (at intake air of 20°C / 60% relative humidity) | ||
| Moisture removal [kg/24h] | 177,6 | |
| Moisture removal [kg/h] | 7,4 | |
| Free blowing air volume [m³/h] | 1.750 | |
| Nominal air volume | Dry air (at intake air of 20 °C / 60% relative humidity) [m³/h] | 1.450 | |
| External compression | Dry air (at intake air of 20 °C / 60% relative humidity) [Pa] | 300 | |
| Inlet connection Ø [mm] | Dry air (at intake air of 20°C / 60% relative humidity) | 250 | |
| Outlet connection Ø | Dry air (at intake air of 20°C / 60% relative humidity) [mm] | 250 | |
| Regeneration air | ||
| Nominal air volume | Regeneration air [m³/h] | 270 | |
| External compression | Regeneration air [Pa] | 300 | |
| Inlet connection Ø | Regeneration air [mm] | 160 | |
| Outlet connection Ø | Regeneration air [mm] | 160 | |
| Operating principle | ||
| Operating principle | TTR-Trisorp-Dual | |
| Operating range | ||
| min. temperature [°C] | -20 | |
| max. temperature [°C] | 40 | |
| min. humidity [% relative humidity] | 0 | |
| max. humidity [% relative humidity (non-condensing)] | 100 | |
| Electrical values | ||
| Mains connection | 380 – 480 V, 50/60 Hz | |
| Nominal current consumption [A] | 15 | |
| Installed power [kW] | 9,8 | |
| Heating capacity [kW] | 9 | |
| Recommended fuse [A] | 16 | |
| Electrical connection | ||
| Terminal connection | ||
| high air capacity | ||
| Continuous dehumidification | ||
| Dimensions | ||
| Length (excluding packaging) [mm] | 734 | |
| Width (excluding packaging) [mm] | 649 | |
| Height (excluding packaging) [mm] | 942 | |
| Weight | ||
| (excluding packaging) [kg] | 100 | |
| Equipment, Features and Functions | ||
|---|---|---|
| Outer casing type | ||
| Stainless steel | ||
| Unit model | ||
| Indoor installation (standard) | ||
| Rental model | ||
| stackable | ||
| Weatherproof | ||
| Equipment | ||
| Wide scope | ||
| Rotor rotation control (rotor and drive) | ||
| Restart-locked overtemperature safety system (regeneration air) | ||
| Operating temperature management (regeneration air) | ||
| Filter monitoring (individual airflows and general warning lamp) | ||
| Duoventic control | ||
| Terminals for external ON/OFF | ||
| Configurable air direction reversal function (low-cost retrofit) | ||
| Hygrostat connection terminals | ||
| Potential-free contacts (operation, fault, filter) | ||
| Operating hours counter | ||
| Air volume control | ||
| Integrated heat recovery unit | ||
| Hygrostat (electronic) | ||
| Hygrostat (mechanical) | ||
| Humidity control | ||
| Humidity and temperature detection | ||
| Sensor-assisted Flowmatic control | ||
| Current consumption meter | ||
| Ammeter | ||
| DIN socket for external ON/OFF | ||
| Regeneration heater construction | ||
| Electric resistance | ||
| Electro-PTC | ||
| Saturated steam (4 bar gauge) | ||
| Gas | ||
| Air pre/post treatment | ||
| Pre-cooling | ||
| Re-cooling | ||
| Pre-heating | ||
| Re-heating | ||
| Portability | ||
| Transport frame | ||
| Braked castor wheels | ||
| Trolley wheels | ||
| Crane – lifting equipment | ||
| Stacker pockets | ||
Optional Features
This unit can be controlled via the SCADA system. It is not included in the standard equipment and is offered as an optional feature.
- Unit fault detection with MODBUS RS-485 infrastructure
- Remote control; ability to read temperature and humidity values
- Ability to record the measured values
The unit can perform its own drainage from the drain point on it. For upward-directed or long-distance water drainage connections, a water pump can optionally be integrated.
Get a Quote for This Product
Would you like to talk right away?
WhatsApp'tan Yaz ☎ +90 507 617 49 59- ✔ Free site survey and sizing
- ✔ Same-day response
- ✔ Installation and commissioning included
How It Works?
Humid air, slowly rotating silica gel coated desikant rotordan passes through; moisture is absorbed by the rotor. A small segment of the rotor is continuously dried with heated regeneration air, and the moisture is expelled through a separate duct. This way eksi sıcaklıklarda bile and operates continuously even at very low humidity targets.
